Stainless steel slot drains model ITMP-3AG-3YG

Stainless steel slot drains isolated heavy duty

STANDARD FEATURES

• With a channel with a minimum depth of 105 mm and a maximum depth of 200 mm, it is possible to build a continuous waste water drainage system with a maximum length of 18000 mm, with a constant slope of 0.6% towards the drain.
• The trenches can be made to the desired dimensions, provided that they meet the slope, minimum and maximum depth.
• By reducing the slope of the gutter, it is possible to construct a trench up to a maximum length of 70.00 meters.
• By using several floor drains, it is possible to construct a trench of several meters.
• The slot channel is provided on both sides with adjustable feet and anchorage strips with a mutual distance of 500 mm. This allows the trench to be attached to a concrete surface and adjusted in height.
• The drains with a plate thickness of 2.00 mm is provided with a flange of 35.00 mm. This is provided with a gasket and is attached with bolt and nut. The bolt and nut are made of 18/8 Cr / NI (AISI 304 quality).

OPTIONS

• On request, this drain system can be made of stainless steel AISI 316 quality.
• A PVC or stainless steel filler profile can be used to simplify assembly and to strengthen the load-bearing capacity of the upper profile.